Shaman Workshop
ORK camp knife

Base price€195

Enquire about this knife

The goal with the ORK was a strong knife optimised for chopping and cutting, with a very comfortable handle and a look that departs from the usual camp-knife shapes. Three design principles guided it. The first was a wide blade with a short drop point that works well thanks to its high flat grind. The second was that no part of the guard should reach below the edge line, so that, like a kitchen knife, the ORK can be used to cut food on a cutting board. The third was a comfortable handle that widens towards the back, a shape often seen on knives by South American makers. Besides being properly ergonomic, the wide butt stops the knife from slipping out of your grip, so you can chop with it safely.

The standard blade steel is Sleipner tool steel, heat-treated to 60 HRC. The drop-point blade is 14 cm long and 4 cm wide. The flat primary bevel is 24 mm high, a so-called HFG (high flat grind), and finishes in a convex cutting edge. The edge runs parallel to the spine, then sweeps up steeply to the point. This blade also has a choil, which makes sharpening easier right where the edge begins. On the standard version four grooves are filed into the spine as a thumb rest; the rest of the spine is a scraping edge.

The handle is 12.5 cm long, 34 mm wide in the middle, with hollows at the front and back. The butt is the widest part of the handle, which is what makes the grip so secure. Seen from above the handle has a “dog-bone” profile: wide at the front, middle and back, with two hollows on each side. It is a very stable, ergonomic grip. The standard ORK has no striking pommel, and the lanyard hole is a simple 6 mm hole at the end of the handle. The scales can be made from any material used in the workshop, but FR4 and Micarta are probably the best choices for this knife.

The sheath is a cowhide or buffalo-leather pouch sheath with a D-ring, an edge guard and blade liners, or you can order the knife with a Kydex sheath.

Specifications

Blade size (L × W × T)
140 × 40 × 6 mm
Blade steel
Sleipner tool steel 60 HRC
Handle size (L × W × T)
126 × 34 × 22 mm
Handle material
FR4, Micarta
Intended use
Camp tasks, hiking, expeditions, survival

Steel, handle and sheath can be changed to suit you. More about steels and handle materials

Tell me what the knife is for

Write to me about the job, the size and the steel you have in mind. We will go through the details, and I will make your knife.