Shaman Workshop
Two EDC knives with blue and red handles on weathered boards

Base price€168

Enquire about this knife

EDC, or everyday carry, knives are probably the most practical cutting tools of all: they are small enough to be with you all the time, so they end up doing most of the knife jobs in your life. Their small blade limits them on the trail or in camp, but in town and for small tasks they are excellent. Opening a parcel, breaking down a cardboard box, cutting cord or webbing, or putting a sandwich together at work: a good EDC knife does all of this well. A small blade means a small handle, which has to be designed very carefully: the knife must still be comfortable, safe and fully functional, even though its handle is about 2 cm shorter than that of an average work knife.

The EDC blade is made from Sleipner tool steel and measures 80 mm long, 32 mm wide and 6 mm thick. The spine is straight to about halfway, then strongly curved. The edge runs to the tip in a single decisive curve, which gives excellent cutting performance. It is a sabre grind with a narrow convex cutting edge. The ricasso is short, so the edge sits very close to your index finger in use, which makes the knife good for carving and fine cutting.

The handle is 106 mm long, straight in line, with a well-rounded cross-section and a maximum width of 30 mm. A finger choil for the index finger makes the grip safe, and there is nothing on the handle to take room away from your hand. The standard version has no striking pommel; a knife this small does not need one. If the handle is made from synthetic material, FR4 or Micarta, a random-filed texture adds a lot of grip. There is also a lanyard hole, so you can add a paracord lanyard for decoration or to extend the handle.

Specifications

Blade size (L × W × T)
80 × 32 × 6 mm
Blade steel
Sleipner tool steel 60 HRC
Handle size (L × W × T)
106 × 30 × 20 mm
Handle material
FR4, wood, Micarta
Intended use
Everyday carry (EDC)

Steel, handle and sheath can be changed to suit you. More about steels and handle materials

Tell me what the knife is for

Write to me about the job, the size and the steel you have in mind. We will go through the details, and I will make your knife.