Shaman Workshop

Hellskinner

Hellskinner knife with a dark burgundy handle on weathered boards

Base price€242

Enquire about this knife

The first Hellskinner was made from a roughly 22 cm offcut of the steel I used for Intruder blades. I could not let such good material go to waste, and it was the perfect excuse to design a knife that had been on my mind for a long time, so I got to work. The brief was a heavy-hitting camp knife in the spirit of a hunting knife, with an 8 mm thick blade, a drop point, a full flat grind and a curved, very comfortable handle. The prototype had an 11 cm blade, but people soon asked for a bigger knife with a longer blade, and so the Hellskinner reached its final form with a 14 cm blade.

It is a massive camp and survival knife. I recommend it to anyone who likes using a robust yet comfortable, American-style knife built for serious work. And why the name Hellskinner? Because it looks like Hellboy’s EDC knife. :-)

The blade is Sleipner tool steel, 14 cm long, 4 cm wide and 8 mm thick. The spine is curved; the main section of the edge is straight, then it sweeps up in a strong curve to the tip. The flat primary bevel runs all the way to the spine, and the cutting edge is convex. This edge geometry suits a thick blade: it cuts well, is easy to sharpen and maintain, and copes with heavy-duty work. The blade is hardened to 59–60 HRC.

The handle is a classic shape, with the guard formed from the blade itself. The back of the handle is strongly curved, while the underside swells in the middle and has pronounced hollows for the index and little fingers. The bird’s-head butt is wide enough to give a secure hold even when chopping wood. The tang is not skeletonised, so the knife is as strong as possible and the balance point sits in the right place. The scales can be FR4 or Micarta. Seen from above the handle has the proven “dog-bone” profile, with curved hollows ground front and rear on both sides, so it is equally thick at the front, middle and back while the edges of your palm settle into the hollows. This very secure grip suits a massive knife like this one perfectly.

The sheath is a pouch sheath in thick cowhide with internal blade liners and a double-layer edge guard. It also has a D-ring, so you can hang the knife from your belt with an extension strap or a carabiner.

Specifications

Blade size (L × W × T)
140 × 40 × 8 mm
Blade steel
Sleipner tool steel 60 HRC
Handle size (L × W × T)
124 × 34 × 24 mm
Handle material
FR4, wood, Micarta
Intended use
Camp tasks, hiking, expeditions, survival

Steel, handle and sheath can be changed to suit you. More about steels and handle materials

Tell me what the knife is for

Write to me about the job, the size and the steel you have in mind. We will go through the details, and I will make your knife.